GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 828140  Size: SH
  1. Remove the 3 screws securing the inboard rear seat back cushion latch cover.

  2. Object Number: 828141  Size: SH
  3. Remove the rear seat belt anchor nut (2) securing the seat belt (1) to the seat frame.
  4. Pull the seat back cover and pad up to expose the seat belt bracket bolts. Refer to Rear Seat Back Cushion Cover and Pad Replacement .

  5. Object Number: 828222  Size: SH
  6. Remove the 2 bolts (2) securing the seat belt bracket (1) to the seat back frame.

  7. Object Number: 828220  Size: SH
  8. Remove the nut (1) securing the retractor assembly (2) to the seat back frame.
  9. Remove the retractor assembly.

Installation Procedure

Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 828220  Size: SH
  1. Install the nut (1) securing the retractor assembly  (2) to the seat back frame.
  2. Tighten
    Tighten the center seat belt retractor mounting nut to 55 N·m (40 lb ft).


    Object Number: 828222  Size: SH
  3. Install the seat belt bracket (1) to the seat back frame with the 2 bolts (2).
  4. Tighten
    Tighten the rear seat belt bracket mounting bolts to 35 N·m (26 lb ft).

  5. Install the seat back cover and pad to the seat back. Refer to Rear Seat Back Cushion Cover and Pad Replacement .

  6. Object Number: 828234  Size: SH
  7. Install the seat belt (1) to the seat frame with the rear seat belt anchor nut (2).
  8. Tighten
    Tighten all rear center seat belt anchor nut to 60 N·m (44 lb ft).


    Object Number: 828140  Size: SH
  9. Install the inboard rear seat back cushion hinge cover with 3 screws.
  10. Tighten
    Tighten the rear seat back cushion hinge cover screws to 2 N·m (18 lb in).