GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2003 🢒 Ascender - 4WD 🢒 Body and Accessories 🢒 Wiring Systems 🢒 Inside Air Temperature Sensor Replacement

Removal Procedure

    Important: Recline the driver seat rearward to access the left center trim pillar.

  1. Remove the upper portion of the left center trim pillar.

    2. Object Number: 810247 Size: SH
  2. Disconnect the electrical connector.
  3. Remove the retaining clips from the B pillar.
  4. Remove the inside air temperature sensor assembly (1) from the B pillar.

Installation Procedure

    Object Number: 810247 Size: SH
  1. Connect the electrical connector to the inside air temperature sensor assembly (1).
  2. Install the inside air temperature sensor assembly (1) to the B pillar.
  3. Install the retaining clips to the B pillar.
  4. Install the upper portion of the left center trim pillar.