1. Remove the 3 screws securing the inboard rear seat back cushion latch cover.



2. Remove the rear seat belt anchor nut (2) securing the seat belt (1) to the seat frame.
3. Pull the seat back cover and pad up to expose the seat belt bracket bolts. Refer to Rear Seat Back Cushion Cover and Pad Replacement .



4. Remove the 2 bolts (2) securing the seat belt bracket (1) to the seat back frame.



5. Remove the nut (1) securing the retractor assembly (2) to the seat back frame.
6. Remove the retractor assembly.

Notice: Refer to Fastener Notice in the Preface section.

1. Install the nut (1) securing the retractor assembly  (2) to the seat back frame.

Tighten
Tighten the center seat belt retractor mounting nut to 55 N·m (40 lb ft).




2. Install the seat belt bracket (1) to the seat back frame with the 2 bolts (2).

Tighten
Tighten the rear seat belt bracket mounting bolts to 35 N·m (26 lb ft).

3. Install the seat back cover and pad to the seat back. Refer to Rear Seat Back Cushion Cover and Pad Replacement .



4. Install the seat belt (1) to the seat frame with the rear seat belt anchor nut (2).

Tighten
Tighten all rear center seat belt anchor nut to 60 N·m (44 lb ft).




5. Install the inboard rear seat back cushion hinge cover with 3 screws.

Tighten
Tighten the rear seat back cushion hinge cover screws to 2 N·m (18 lb in).