GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2003 🢒 Ascender - 4WD 🢒 Body and Accessories 🢒 Seats 🢒 Rear Seat Back Cushion Hinge Replacement

Removal Procedure
  1. Remove the seat from the vehicle. Refer to Rear Seat Replacement .
  2. Remove the inboard/outboard rear seat back cushion latch covers. Refer to Rear Seat Back Cushion Hinge Cover Replacement .

    3. Object Number: 828141 Size: SH
  3. Remove the rear center seat belt anchor nut (2), if replacing the left-hand seat inboard hinge.

    4. Object Number: 831437 Size: SH
  4. Remove the seat belt side buckle nut (2), if replacing the right-hand seat inboard hinge.
  5. Remove the seat back cover and pad high enough to expose the seat back mounting bolts. Refer to Rear Seat Back Cushion Cover and Pad Replacement .

    6. Object Number: 828223 Size: SH
  6. Remove the seat back mounting bolts (2) securing the rear seat back frame to the inboard/outboard rear seat back hinge assembly.
  7. Remove the seat cushion mounting bolts (1) securing the rear seat cushion frame to the inboard/outboard rear seat back hinge assembly.
  8. Remove the seat back assembly.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 828223 Size: SH
  1. Install the seat cushion mounting bolts (1) securing the rear seat cushion frame to the inboard/outboard rear seat back hinge assembly.

    2. Tighten
    Tighten all rear seat cushion mounting bolts to 25 N·m (18 lb ft).


    Object Number: 828223 Size: SH
  2. Install the seat back mounting bolts (2) securing the rear seat back frame to the inboard/outboard rear seat back hinge assembly.

    3. Tighten
    Tighten all rear seat back mounting bolts to 25 N·m(18 lb ft).


    Object Number: 831437 Size: SH
  3. Install the seat belt side buckle (1) to the seat with the seat belt anchor nut (2), if replacing the right-hand seat inboard hinge.

    4. Tighten
    Tighten the seat belt side buckle nut to 55 N·m7(40 lb ft).


    Object Number: 828141 Size: SH
  4. Install the rear center seat belt anchor nut (2), if replacing the left-hand seat inboard hinge.

    5. Tighten
    Tighten all rear center seat belt anchor nut to 60 N·m(44 lb ft).

  5. Install the seat back cover and pad to the seat back. Refer to Rear Seat Back Cushion Cover and Pad Replacement .
  6. Install the inboard/outboard rear seat back cushion latch covers. Refer to Rear Seat Back Cushion Hinge Cover Replacement .
  7. Install the seat in the vehicle. Refer to Rear Seat Replacement .