GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 799604  Size: SH
  1. Remove the cargo shelf.
  2. Tumble the third row seats to the cargo position.
  3. Remove the left body side window rear garnish molding. Refer to Body Side Window Rear Garnish Molding Replacement .
  4. Remove the left body side window forward garnish molding. Refer to Body Side Rear Window Garnish Molding Replacement .
  5. Remove the liftgate sill plate. Refer to Liftgate Door Sill Plate Replacement .
  6. Remove the left rear door sill panel. Refer to Rear Side Door Sill Plate Replacement .
  7. Remove the lower seat belt anchor bolt.

  8. Object Number: 799090  Size: SH
  9. Remove the auxiliary power outlet from the trim panel. Refer to Cigar Lighter Receptacle or 12-Volt Accessory Power Receptacle Replacement .

  10. Object Number: 798353  Size: SH
  11. Release the five screws that retain the rear quarter trim panel to the body.
  12. Remove the rear quarter trim panel from the vehicle.

Installation Procedure


    Object Number: 799090  Size: SH
  1. Install the auxiliary power outlet to the trim panel. Refer to Cigar Lighter Receptacle or 12-Volt Accessory Power Receptacle Replacement .

  2. Object Number: 798353  Size: SH
  3. Position the trim panel to the vehicle.
  4. Position the seat belt over the top of the trim panel, ensuring that the buckle is not behind the trim panel.
  5. Index the locating tabs on the trim panel to the holes in the body.
  6. Connect the wiring harness connector to the auxiliary power outlet.
  7. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  8. Install the five screws that the retain the rear quarter trim panel to the body.
  9. Tighten
    Tighten the rear quarter trim panel screws to 2.5 N·m (22 lb in).

  10. Install the seat belt lower anchor.
  11. Tighten
    Tighten the seat belt anchor bolt to 70 N·m (52 lb ft).

  12. Install the left rear door sill panel. Refer to Rear Side Door Sill Plate Replacement .
  13. Install the liftgate sill plate. Refer to Liftgate Door Sill Plate Replacement .
  14. Install the left body side window forward garnish molding. Refer to Body Side Rear Window Garnish Molding Replacement .
  15. Install the left body side window rear garnish molding. Refer to Body Side Window Rear Garnish Molding Replacement .
  16. Return the third row seats to the upright position.
  17. Install the cargo shelf.