GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2003 🢒 Ascender - 4WD 🢒 Body and Accessories 🢒 Frame and Underbody 🢒 Frame Brace Replacement

Removal Procedure

    Object Number: 879650 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the mounting bolts (2) from the frame brace (1) .
  3. Remove the frame brace (1) from the frame.

Installation Procedure

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.


    Object Number: 879650 Size: SH
  1. Install the frame brace (1) to the frame using the mounting bolts (2) .

    2. Tighten
    Tighten the bolts to 45 N·m (33 lb ft)

  2. Lower the vehicle.