GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2003 🢒 Ascender - 4WD 🢒 General Information 🢒 General Information 🢒 Differential Side Bearings Replacement

Tools Required

    • J 22912-B Split-Plate Bearing Puller
    • J 21784 Side Bearing Installer
    • J 8092 Universal Driver Handle- ¾ in - 10
    • J 22888-D Side Bearing Remover Kit

Removal Procedure
  1. Remove the differential assembly. Refer to Differential Replacement .

    2. Object Number: 680400 Size: SH
  2. Remove the differential side bearings by performing the following steps:
    3. 2.1. Install the differential assembly in a vise.
    2.2. Install the J 22888-20A  (2) and the J 8107-4  (1) as shown.
    2.3. Remove the differential side bearings using the J 22888-20A .
  3. Remove the differential assembly from the vise.

Installation Procedure

    Object Number: 651740 Size: SH
  1. Install the differential side bearings by doing the following:
    2. 1.1. In order to protect the differential case, install the J 8107-4 in the case on the side opposite the bearing installation.
    1.2. Install the J 21784  (2) and the J 8092  (1) onto the differential case bearing as shown.
    1.3. Drive the bearing onto the case using the J 21784 and the J 8092 .
  2. Install the differential assembly. Refer to Differential Replacement .