GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2004 🢒 Ascender - 4WD 🢒 Driveline/Axle 🢒 Front Drive Axle 🢒 Intermediate Shaft Bearing Assembly Disassemble

Disassembly Procedure

    Object Number: 756961 Size: SH
  1. Remove the actuator assembly bolts.
  2. Remove the actuator assembly.

    3. Object Number: 756960 Size: SH
  3. Remove the intermediate shaft bearing assembly bolts.
  4. Separate the intermediate shaft bearing assembly case halves.

    5. Object Number: 767110 Size: SH
  5. Remove the thrust washer.

    6. Object Number: 757536 Size: SH
  6. Remove the clutch fork gear.

    7. Object Number: 756965 Size: SH
  7. Remove the clutch fork and the clutch fork sleeve.

    8. Object Number: 756953 Size: SH
  8. Remove the washer.

    9. Object Number: 756956 Size: SH
  9. Remove the clutch fork sleeve gear.

    10. Object Number: 756962 Size: SH
  10. Remove the clutch fork spring.

    11. Object Number: 756150 Size: SH
  11. Remove the thrust washer.

    12. Object Number: 756152 Size: SH
  12. Remove the inner bearing from the outer intermediate shaft bearing case half using a hammer and a brass drift.
  13. Remove the outer bearing from the outer intermediate shaft bearing case half using a hammer and a brass drift.

    14. Object Number: 756151 Size: SH
  14. Remove the bearing from the inner intermediate shaft bearing case half using a hammer and a brass drift.