GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2005 🢒 Ascender - 4WD 🢒 Body 🢒 Body Front End 🢒 Hood Rear Seal Replacement

Removal Procedure

    Object Number: 742164 Size: SH
  1. Open the hood.
  2. Remove the rear hood seal from the air inlet grille panel studs.
  3. Remove the seal from the air inlet grille panel.

Installation Procedure

    Object Number: 742164 Size: SH
  1. Position the seal to the air inlet grille panel.
  2. Install the rear hood seal to the air inlet grille panel studs.
  3. Close the hood.