GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2005 🢒 Ascender - 4WD 🢒 Body 🢒 Body Rear End 🢒 Endgate Prop Rod Replacement

Removal Procedure

    Object Number: 902556 Size: SH
  1. Open the endgate.
  2. Remove the endgate prop rod (3) from the retainer clip (2).
  3. Remove the bolt retaining the proper rod (3) to the endgate.
  4. Remove the prop rod retaining bolts (1) from the body.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 902556 Size: SH
  1. Install the prop rod retaining bolts (1) to the body.

    2. Tighten
    Tighten the prop rod bolts to 25 N·m (18 lb ft).

  2. Install the retaining clip (2) to the endgate.
  3. Install the bolt retaining the prop rod to the endgate.

    4. Tighten
    Tighten the prop rod bolt to 25 N·m (18 lb ft).

  4. Install the prop rod (3) to the retaining clip (2) on the endgate.