GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2005 🢒 Ascender - 4WD 🢒 Body 🢒 Exterior Trim 🢒 Rear Rocker Molding Scuff Plate Replacement

Removal Procedure
  1. Open the rear door.

    2. Object Number: 750775 Size: SH
  2. Remove the push-pin that retains the rear rocker molding scuff plate to the rocker panel.
  3. Lift upwards on the scuff plate to release the retaining tabs.
  4. Remove the scuff plate from the vehicle.

Installation Procedure

    Object Number: 750775 Size: SH
  1. Position the scuff plate to the rocker panel.
  2. Apply downward pressure on the scuff plate to seat the retaining tabs.
  3. Install the push-pin that retains the scuff plate to the rocker panel.
  4. Close the rear door.