GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2005 🢒 Ascender - 4WD 🢒 Body 🢒 Lighting Systems 🢒 Endgate Cable Replacement

Removal Procedure
  1. Open the endgate (drop mode).
  2. Support the endgate using the prop rod.

    3. Object Number: 1229111 Size: SH
  3. Remove the bolts retaining the support cable to the endgate and the body.
  4. Remove the support cable from the vehicle.

Installation Procedure

    Object Number: 1229111 Size: SH
  1. Install the support cable to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the bolts retaining the support cable to the endgate and to the body.

    3. Tighten
    Tighten the support cable bolts to 25 N·m (18 lb ft).

  3. Remove the prop rod and return it to its storage position.
  4. Close the endgate.