Removal Procedure
- Open the moveable roof assembly.
- Remove the clip (1) retaining the rear locator (2) to the
moveable roof assembly, using a flat-bladed tool.
- Slide the rear locator (2) rearward.
- Using a flat-bladed tool, press the rear latch spring (1) forward
off the retaining pin of the rear locator.
- Slide the rear locator (2) from the tab on the
moveable roof side rail.
Installation Procedure
- Using a flat-bladed tool, press the rear latch spring forward into the
channel of the moveable roof frame assembly.
- Slide the rear locator (2) onto the tab on the
moveable roof side rail.
- Install the rear latch spring (1) onto the
retaining pin of the rear locator (2).
- Slide the rear locator (2) forward until it is flush with the end
of the moveable roof frame.
- Install the clip (1) retaining the rear locator (2)
to the moveable roof assembly, ensuring the clip is fully engaged.
- Close the moveable roof assembly.