Removal Procedure
- Using a flat-bladed tool, carefully remove the finish covers (3) from the luggage carrier side rails (2).
- Unlock the cross rails (4) by releasing the locking tab (1) on the end of each cross rail.
- Slide the cross rails forward and remove from the side rails.
- Remove the bolts that retain the side rails to the roof panel.
- Remove the side rails from the roof panel.
Installation Procedure
- Position the side rails (2) to the roof panel.
- Install the bolts which retain the side rails to the roof panel, starting with the rearmost bolt first on each side .
- Install the cross rails (4) to the side rails.
- Lock the cross rails to the slide rails.
- Install and secure the finish covers (3) to the side rails.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the luggage carrier side rail bolts to 5 N·m (44 lb in).
Important: Ensure that the loops on the cross rails are indexed toward the front of the vehicle.
