GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2005 🢒 Ascender - 4WD 🢒 Body 🢒 Seats 🢒 Rear Seat and Midgate Rest Replacement

Removal Procedure

    Object Number: 1236762 Size: SH
  1. Remove the rear seat floor trim panel stud cover. Refer to Rear Seat Floor Trim Panel Stud Cover Replacement .
  2. Remove the 4 nuts that retain the rear seat rest to the floor.
  3. Remove the rear seat rest from the vehicle.

Installation Procedure

    Object Number: 1236762 Size: SH
  1. Position the rear seat rest onto the floor.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the 4 rear seat rest nuts onto the floor studs.

    3. Tighten
    Tighten the rear seat rest nuts to 10 N·m (88 lb in).

  3. Install the rear seat rest cover. Refer to Rear Seat Floor Trim Panel Stud Cover Replacement .