GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2005 🢒 Ascender - 4WD 🢒 Body 🢒 Seats 🢒 Rear Seat Head Restraint Replacement

Removal Procedure
  1. Raise the head restraint to the full up position.

    2. Object Number: 753724 Size: SH
  2. Adjust the seat cushion just below the top of the seat back in order to gain access to the retaining clip on each head restraint post.
  3. Remove the retaining clip from each head restraint post.
  4. Remove the head restraint from the seat back.

Installation Procedure

    Object Number: 753724 Size: SH
  1. Install the retaining clips to the head restraint retractor.

    2. Object Number: 753741 Size: SH
  2. Verify that the retaining clips are fully seated.
  3. Install the rear seat head restraint posts to the head restraint retractor, verifying that the notches in the head restraint posts are indexed toward the back of the seat.
  4. Lower the head restraint to the full down position.