GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2005 🢒 Ascender - 4WD 🢒 Body 🢒 Seats 🢒 Driver Seat Adjuster Memory Switch Replacement

Removal Procedure

    Object Number: 690976 Size: SH
  1. Lift up on the front edge of the door lock and side window switch (1) in order to release the front retaining clip.
  2. Lift up on the rear edge of the switch panel in order to release the 2 rear retaining clips.

    3. Object Number: 750778 Size: SH
  3. Remove the electrical connector (2) from the memory seat switch.
  4. Remove the memory seat switch from the lock and door lock and side window switch (1).

Installation Procedure

    Object Number: 750778 Size: SH
  1. Position the memory seat switch to the lock and door lock and side window switch (1).
  2. Connect the electrical connector (2) to the memory seat switch.

    3. Object Number: 690976 Size: SH
  3. Install the door lock and side window switch (1). Verify that the front retaining clips and the rear retaining clips are fully seated.