GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2005 🢒 Ascender - 4WD 🢒 Body 🢒 Seats 🢒 Rear Seat Latch Rod Replacement - Rear Seat Number 2

Removal Procedure
  1. Remove the seat from the vehicle. Refer to Rear Number 2 Seat Replacement .

    2. Object Number: 824146 Size: SH
  2. Remove the two bolts (2) securing the rear seat cushion assembly (1) to the seat latch rod (3).

    3. Object Number: 824156 Size: SH
  3. Remove the seat riser latch assembly (1) from the seat latch rod (2).

    4. Object Number: 824155 Size: SH
  4. Remove the retainer nut (2) from each end of the seat latch rod (1).
  5. Remove the seat latch rod.

Installation Procedure
  1. Install the seat latch rod (1) to the inner and outer riser assemblies.

    2. Object Number: 824155 Size: SH
  2. Install a retainer nut (2) on each end of the seat latch rod (1).

    3. Object Number: 824156 Size: SH
  3. Install the seat riser latch assembly (1) to the seat latch rod (2).

    4. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 824146 Size: SH
  4. Install the rear seat cushion assembly (1) to the seat latch rod (3) with two bolts (2).

    5. Tighten
    Tighten the rear seat cushion bolts to 11 N·m (97 lb in).

  5. Install the seat in the vehicle. Refer to Rear Number 2 Seat Replacement .