Rear Seat Mid-Position Floor Latch Assembly Replacement TrailBlazer EXT, Envoy XL, Envoy XUV

1. Remove the seat from the vehicle. Refer to Rear Seat Replacement .
2. Remove the trim panel from the seat cushion. Refer to Rear Seat Cushion Trim Panel Replacement .
3. Remove the rear center seat belt buckle assembly from the floor latch assembly. Refer to Rear Seat Center Belt Buckle Replacement in Seat Belts.



4. Remove the cable (3) from the mid-position floor latch assembly (2).
5. Remove the bolts (1) securing the mid-position floor latch assembly to the seat cushion frame.
6. Remove the mid-position floor latch assembly.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the mid-position floor latch assembly to the seat cushion frame with the bolts (1).

Tighten
Tighten the rear seat mid-position floor latch assembly bolts to 35 N·m (26 lb ft).

2. Install the cable (3) to the mid-position floor latch assembly (2).
3. Install the rear center seat belt buckle assembly to the floor latch assembly. Refer to Rear Seat Center Belt Buckle Replacement in Seat Belts.
4. Install the trim panel to the seat cushion. Refer to Rear Seat Cushion Trim Panel Replacement .
5. Install the seat in the vehicle. Refer to Rear Seat Replacement .