GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 879617  Size: SH
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the transfer case shield mounting bolts (3) from the transmission support.
  3. Remove the transfer case shield (2) from transmission support.

Installation Procedure


    Object Number: 879617  Size: SH
  1. Install the transfer case shield (2) to the transmission support. Ensure that the J-nuts (1) are in place.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the transfer case shield mounting bolts (3).
  4. Tighten
    Tighten the transfer case shield mounting bolts to 16 N·m (12 lb ft).

  5. Lower the vehicle. Refer to Lifting and Jacking the Vehicle .