Base Radio Shown, Bose® Similar
If your vehicle has the Bose® audio system, it has six Bose® amplified
speakers.
Radio Data System (RDS)
The audio system has a Radio Data System (RDS). RDS features are available for
use only on FM stations that broadcast RDS information.
With RDS, the radio can do the following:
• | Seek to stations broadcasting the selected type of programming |
• | Receive announcements concerning local and national emergencies |
• | Display messages from radio stations |
This system relies upon receiving specific information from these stations and
only works when the information is available. In rare cases, a radio station can broadcast
incorrect information that causes the radio features to work improperly. If this happens,
contact the radio station.
While the radio is tuned to an RDS station, the station name or call letters
display instead of the frequency. RDS stations can also provide the time of day, a
program type (PTY) for current programming, and the name of the program being broadcast.
XM™ Satellite Radio Service
XM™ is a satellite radio service that is based in the 48 contiguous United
States and Canada. XM™ offers a large variety of coast-to-coast channels including
music, news, sports, talk, traffic/weather (U.S. subscribers), and children’s
programming. XM™ provides digital quality audio and text information that includes
song title and artist name. A service fee is required in order to receive the XM™
service. For more information, contact XM™; In the U.S. at www.xmradio.com or
call 1-800-852-XMXM (9696) or in Canada at www.xmradio.ca or call 1-877-GET-XMSR (438-9677).
Playing the Radio
PWR (Power): Press this knob to turn the system on and off.
VOL
(Volume): Turn the
VOL
knob
clockwise or counterclockwise to increase or to decrease the volume.
INFO (Information): When the ignition is off, press this knob
to display the time.
For RDS, press the INFO knob to change what displays
while using RDS. The display options are station name, RDS station frequency, PTY,
and the name of the program (if available).
For XM™ (if equipped), press the INFO knob while in XM™ mode to
retrieve four different categories of information related to the current song or channel:
Artist, Song Title, Category or PTY, Channel Number/Channel Name.
To change the default on the display, press the INFO knob until the desired
option displays, then press and hold the knob until a beep sounds. The selected display
becomes the default.
AUTO VOL (Automatic Volume): With automatic volume, the audio
system adjusts automatically to make up for road and wind noise as you drive by increasing
the volume as vehicle speed increases.
Set the volume at the desired level.
Press this button to select LOW, MEDIUM, or HIGH. AVOL (automatic volume) displays.
Each higher setting provides more volume compensation at faster vehicle speeds. To
turn automatic volume off, press this button until AVOL OFF (automatic volume off)
displays.
Finding a Station
BAND: Press this button to switch between FM1, FM2, AM, or XM1
or XM2 (if equipped). The selection displays.
TUNE: Turn this knob to select radio stations.
SEEK
: Press either the left
or right
SEEK arrow or the left
or right
TYPE arrow to go to the previous or to the next station and stay there.
The radio only seeks stations with a strong signal that are in the selected
band.
SCAN
: Press and hold either the left
or right
SCAN arrow or the left
or right
TYPE arrow for two seconds until SCAN displays and a beep sounds.
The radio goes to a station, plays for a few seconds, then goes to the next station.
Press either the left
or right
SCAN
arrow or the left
or right
TYPE
arrow again to stop scanning.
To scan preset stations, press and hold
either the left
or right
SCAN
arrow or the left
or right
TYPE
arrow for more than four seconds. PSCN displays and a double beep sounds. The radio
goes to a preset station, plays for a few seconds, then goes to the next preset station.
Press either the left
or right
SCAN
arrow or the left
or right
TYPE
arrow again to stop scanning presets.
The radio only scans stations with a strong signal that are in the selected
band.
Setting Preset Stations
Up to 30 stations (six FM1, six FM2, and six AM,
six XM1 and six XM2 (if equipped)), can be programed on the six numbered
pushbuttons, by performing the following steps:
- Turn the radio on.
- Press BAND to select FM1, FM2, AM, or XM1 or XM2.
- Tune in the desired station.
- Press and hold one of the six numbered pushbuttons until a beep sounds.
When that numbered pushbutton is pressed, the station that was set, returns for that
pushbutton.
- Repeat the steps for each pushbutton.
To store an equalization setting to a preset station perform the following:
- Tune to the preset station.
- Press and release the AUTO EQ (automatic equalization) button to select
the equalization setting.
Once the equalization no longer displays, the
equalization is set for that preset station.
Setting the Tone (Bass/Midrange/Treble)
AUDIO: Push and release the AUDIO knob until BASS, MID (midrange)
(without Bose®), or TREB (treble) displays. Turn the knob to increase or to decrease
the tone. The display shows the bass, midrange (without Bose®), or treble level.
If a station is weak or has static, decrease the treble.
To adjust the
bass, midrange (without Bose®), or treble to the middle position while it is displayed,
push and hold the AUDIO knob. The radio produces one beep and adjusts the display
level to the middle position.
To adjust all tone and speaker controls to the middle position, push and hold
the AUDIO knob when no tone or speaker control is displayed. ALL CENTERED displays,
a beep sounds, and the display level adjusts to the middle position.
AUTO EQ (Automatic Equalization): Press this button to select
customized equalization settings designed for country/western, jazz, talk, pop, rock,
and classical. Selecting CUSTOM or adjusting the tone controls, returns the EQ to
the manual mode.
The radio saves separate AUTO EQ (automatic equalization)
settings for each preset and source.
If the radio is equipped with the Bose® audio system, the AUTO EQ settings
are either CUSTOM or TALK.
Adjusting the Speakers (Balance/Fade)
AUDIO: To adjust the balance between the right and the left
speakers, push and release the AUDIO knob until BAL (balance) displays. Turn the knob
to move the sound toward the right or the left speakers.
To adjust the
fade between the front and the rear speakers, push and release the AUDIO knob until
FADE displays. Turn the knob to move the sound toward the front or the rear speakers.
To adjust the balance or fade to the middle position while it is displayed,
push the AUDIO knob, then push it again and hold it until the radio produces one beep.
The balance or fade adjusts to the middle position.
To adjust all tone and speaker controls to the middle position, push and hold
the AUDIO knob when no tone or speaker control is displayed. ALL CENTERED displays,
a beep sounds, and the display level adjusts to the middle position.
Finding a Program Type (PTY) Station (RDS and XM™)
To select and find a desired PTY perform the following:
- Press the TYPE button to activate program type select mode. TYPE and a
PTY displays.
- Turn the TYPE knob or press and release the TYPE button to select a PTY.
- Once the desired PTY is displayed, press and release either the left
or right
TYPE arrow or the left
or right
SEEK arrow to select and
to go to the PTY's first station.
- To go to another station within that PTY, press the TYPE button then,
press either the left
or right
TYPE
arrow or the left
or right
SEEK
arrow once.
- Press either the left
or right
TYPE arrow or the left
or right
SEEK arrow twice to exit program type select mode.
If the radio cannot find the desired program type, NONE displays and the radio
returns to the last station you were listening to.
SCAN: Scan the stations within a PTY by performing the following:
- Press the TYPE button to activate program type select mode. TYPE and the
last selected PTY displays.
- Turn the TYPE knob or press and release the TYPE button to select a PTY.
- Once the desired PTY is displayed, press and hold either the left
or right
TYPE arrow or the left
or right
SCAN arrow for two seconds,
and the radio begins scanning the stations in the PTY.
- Press either the left
or right
TYPE arrow or the left
or right
SCAN arrow to stop scanning.
BAND (Alternate Frequency): Alternate frequency lets the radio
switch to a stronger station with the same program type. To turn alternate frequency
on, press and hold BAND for two seconds. AF ON displays. The radio might switch
to stations with a stronger frequency.
To turn alternate frequency off,
press and hold BAND again for two seconds. AF OFF displays. The radio does
not switch to other stations.
This function does not apply for XM™ Satellite Radio Service.
Setting Preset PTYs (RDS Only)
These buttons have factory PTY presets. Up to 12 PTYs (six FM1
and six FM2), can be programmed on the six numbered pushbuttons, by performing
the following steps:
- Press BAND to select FM1 or FM2.
- Press the TYPE button to activate program type select mode. TYPE and the
last selected PTY displays.
- Turn the TYPE knob or press and release the TYPE button to select a PTY.
- Press and hold one of the six numbered pushbuttons until a beep sounds.
When that numbered pushbutton is pressed, during program TYPE mode, the PTY that was
set, returns.
- Repeat the steps for each pushbutton.
RDS Messages
INFO (Information): If the current station has a message, the
information symbol displays. Press this button to see the message. The message displays
the artist, song title, call in phone numbers, etc.
If the entire message
is not displayed, parts of the message appears every three seconds. To scroll through
the message, press and release the INFO button. A new group of words display after
every press of the button. Once the complete message displays, the information symbol
disappears until another new message is received. The last message can be displayed
by pressing the INFO button. The last message can be viewed until a new message is
received or a different station is tuned to.
Radio Messages
CAL ERR (Calibration Error): The audio system has been calibrated
for your vehicle from the factory. If CAL ERR displays, it means that the radio has
not been configured properly for the vehicle and must be returned to your dealer/retailer
for service.
LOCKED: This message is displayed when the THEFTLOCK® system
has locked up. Take the vehicle to your dealer/retailer for service.
If any error occurs repeatedly, or if an error cannot be corrected, contact
your dealer/retailer.
Radio Messages for XM™ Only
See
XM Radio Messages
later in this
section for further details.
Playing a CD
Insert a CD partway into the slot, label side up. The player pulls it in and
the CD should begin playing. If you want to insert a CD with the ignition off, first
press the eject button or the INFO knob.
If the ignition or radio is turned off with the CD in the player, it stays in
the player. When the ignition or radio is turned on, the CD starts playing where it
stopped, if it was the last selected audio source.
When a CD is inserted, the CD symbol displays. As each new track starts to play,
the track number displays.
The CD player can play the smaller 3 inch (8 cm) single CDs with an adapter
ring. Full-size CDs and the smaller CDs are loaded in the same manner.
If playing a CD-R, the sound quality can be reduced due to CD-R quality, the
method of recording, the quality of the music that has been recorded, and the way
the CD-R has been handled. There can be an increase in skipping, difficulty in finding
tracks, and/or difficulty in loading and ejecting. If these problems occur, check
the bottom surface of the CD. If the surface of the CD is damaged, such as cracked,
broken, or scratched, the CD will not play properly. If the surface of the CD is soiled,
see
Care of Your CDs
for more information.
If there is no apparent damage, try a known good CD.
Do not add any label to a CD, it could get caught in the CD player. If a CD
is recorded on a personal computer and a description label is needed, try labeling
the top of the recorded CD with a marking pen.
Notice: If a label is added to a CD, or more than one CD is inserted
into the slot at a time, or an attempt is made to play scratched or damaged CDs, the
CD player could be damaged. While using the CD player, use only CDs in
good condition without any label, load one CD at a time, and keep the CD player and
the loading slot free of foreign materials, liquids, and debris.
If an error displays, see "CD Messages" later in this section.
1 PREV (Previous): Press this pushbutton to go to the beginning
of the current track (if more than eight seconds have played), or to the beginning
of the previous track (if less than eight seconds have played). TRACK and the track
number displays. If this pushbutton is held or pressed more than once, the player
continues moving backward through the CD.
2 NEXT: Press this pushbutton to go to the next track. TRACK
and the track number displays. If this pushbutton is held or pressed more than once,
the player continues moving forward through the CD.
3 REV (Reverse): Press and hold this pushbutton to quickly reverse
within a track. Press and hold this pushbutton for less than two seconds to reverse
at six times the normal playing speed. Press and hold it for more than two seconds
to reverse at 17 times the normal playing speed. ET and the elapsed time of
the track displays. Release this pushbutton to play the passage.
4 FWD (Forward): Press and hold this pushbutton to quickly advance
within a track. Press and hold this pushbutton for less than two seconds to advance
at six times the normal playing speed. Press and hold it for more than two seconds
to advance at 17 times the normal playing speed. ET and the elapsed time of
the track displays. Release this pushbutton to play the passage.
6 RDM (Random): Press this pushbutton to hear the tracks in
random, rather than sequential, order. RDM ON displays. RDM T and the
track number displays when each track starts to play. Press this pushbutton again
to turn off random play. RDM OFF displays.
SEEK
: Press the left
SEEK arrow to go to the start of
the current or to the previous track. Press the right
SEEK
arrow to go to the start of the next track. If either the left
or right
SEEK arrow is pressed more than once,
the player continues moving backward or forward through the CD.
SCAN
: Press and hold either the left
or right
SCAN arrow or the left
or right
TYPE arrow for more than two seconds until SCAN displays and
a beep sounds. The radio goes to the next track, plays for 10 seconds, then goes to
the next track. Press either the left
or right
SCAN arrow or the left
or right
TYPE arrow again, to stop scanning.
INFO (Information): Press this knob to see how long the current
track has been playing. ET and the elapsed time displays. To change the default on
the display, track or elapsed time, press the knob until you see the desired display,
then press and hold the knob for two seconds. The radio produces one beep and the
selected display becomes the default.
BAND: Press this button to listen to the radio when a CD is
playing. The inactive CD remains inside the radio for future listening.
CD AUX (Auxiliary): Press this button to play a CD when listening
to the radio, or to listen to an auxiliary source (such as rear seat entertainment,
if your vehicle has this feature).
(Eject): Press the
button to eject a CD. Eject can be activated with either the ignition or
radio off. CDs can be loaded with the radio and ignition off if this button is pressed
first.
CD Messages
If the CD comes out, it could be for one of the following reasons:
• | It is very hot. When the temperature returns to normal, the CD should
play. |
• | You are driving on a very rough road. When the road becomes smoother,
the CD should play. |
• | The CD is dirty, scratched, wet, or upside down. |
• | The air is very humid. If so, wait about an hour and try again. |
• | There can have been a problem while burning the CD. |
• | The label can be caught in the CD player. |
If the CD is not playing correctly, for any other reason, try a known good CD.
If any error occurs repeatedly or if an error cannot be corrected, contact your
dealer/retailer. If the radio displays an error message, write it down and provide
it to your dealer/retailer when reporting the problem.