GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2007 🢒 Ascender - 4WD 🢒 Body Systems 🢒 Wipers and Washers 🢒 Rear Window Wiper and Washer Switch Replacement

Removal Procedure
  1. Remove the instrument panel (I/P) accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement.

    2. Object Number: 651277 Size: SH
  2. Disconnect the electrical connector from the wiper washer switch.
  3. Release the wiper washer switch locking tabs.
  4. Remove the switch from the trim plate.

Installation Procedure

    Object Number: 651277 Size: SH
  1. Position the switch to the trim plate.
  2. Connect the electrical connector to the wiper washer switch.
  3. Install the switch to the instrument panel trim plate, ensuring that the locking tabs are properly seated.
  4. Install the I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement.