Roof Console Retainer Replacement for Isuzu Ascender - 4WD 2007

1. Lower the headliner. Refer to Headlining Trim Panel Replacement .



2. Remove the 4 screws securing the console retainer to the Z clips.
3. Remove the roof retainer from the vehicle.
4. If replacing the roof retainer, remove the Z clips from the roof panel.

1. If replacing the roof retainer, install the roof retainer the roof panel ensuring the Z clips are fully seated.
2. If installing the existing roof retainer, position the roof retainer to the roof panel.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Partially install the 4 screws retaining the roof retainer to the Z clips.

Tighten
Tighten the roof retainer attachment screws to 1.2 N·m (10 lb in).

4. Install the headliner. Refer to Headlining Trim Panel Replacement .