Liftgate Window Side Reveal Molding Sealing Strip Replacement for Isuzu Ascender - 4WD 2008

1. Open the liftgate.
2. Release the 5 clips that retain the reveal molding to the body.
3. Peel the reveal molding away from the body and remove from the vehicle.

1. Remove the adhesive liner from the reveal molding, if applicable.
2. Position the reveal molding to the body.
3. Align the retaining clips on the reveal molding with the recesses in the body.
4. Starting at the bottom of the reveal molding, seat the molding to the body. Ensure that the retaining clips are fully seated.
5. Close the liftgate.