Disconnecting Procedure
Warning: Refer to Battery Disconnect Warning in the Preface section.
- Record all preset and theft codes from the radio.
- Turn the ignition switch to the LOCK position.
- Verify that all the electrical components are off such as interior lights, all doors are closed, the underhood lamp, etc.
- Loosen the negative battery cable bolt.
- Remove the negative battery cable (2) from the battery.
- Position the negative battery cable away from any body ground.
Connecting Procedure
- Verify that all electrical components are off such as interior lights, all doors are closed, the underhood lamp, etc.
- Clean any corrosion from the negative battery cable using a wire brush.
- Position the negative battery cable (2) to the battery.
Caution: Refer to Fastener Caution in the Preface section.
- Tighten negative battery cable bolt to
15 N·m (11 lb ft).