Removal Procedure
- Apply and release the brake pedal several times to deplete the power vacuum brake booster vacuum reserve.
- Disconnect the vacuum brake booster check valve and hose assembly (1) from the power vacuum brake booster.
- Remove the vacuum hose (1) and clamp (2) from the check valve (3).
Compress the clamp to release the hose from the check valve.
- If equipped with the 6.0L engine, remove the upper intake manifold sight shield. Refer to
Upper Intake Manifold Sight Shield Replacement.
- Disconnect the vacuum brake booster hose from the intake manifold.
Installation Procedure
- Connect the vacuum brake booster hose to the intake manifold.
If necessary, a small amount of denatured alcohol may be used as a lubricant to ease installation. Do not use soap.
- Install the vacuum hose (1) and clamp (2) to the check valve (3).
If necessary, a small amount of denatured alcohol may be used as a lubricant to ease installation. Do not use soap.
- If equipped with the 6.0L engine, install the upper intake manifold sight shield. Refer to
Upper Intake Manifold Sight Shield Replacement.
- Connect the vacuum brake booster check valve and hose assembly (1) to the power vacuum brake booster.
If necessary, a small amount of denatured alcohol may be used as a lubricant to ease installation.
Do not use soap.