Special Tools

Caution: Refer to Fastener Caution in the Preface section.





Note: Do not use the crankshaft balancer bolt again. Install a NEW crankshaft balancer bolt during final assembly.

1. Install the J 42386-A tool and bolts.

Use 1 M10 - 1.5 x 120 mm and 1 M10 - 1.5 x 45 mm bolt for proper tool operation and tighten the bolts to 50 N·m (37 lb ft).




2. Remove the crankshaft balancer bolt (139).



3. Use the J 41816-A remover  (1) and the J 41816-2 protector  (2) in order to remove the crankshaft balancer.



4. Remove the balancer (1).



5. Remove the J 42386-A tool and bolts.