GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Isuzu
🢒
2009
🢒
Ascender - 4WD
🢒
Diagnostic Navigation
🢒
Vehicle Diagnostic Information
🢒 Engine Oil Pressure Sensor and/or Switch Replacement
Special Tools
J 41712
Oil Pressure Switch Socket
Removal Procedure
Remove the intake manifold. Refer to
Intake Manifold Replacement
.
Disconnect the oil pressure sensor electrical connector (1).
Using
J 41712
or equivalent, remove the oil pressure sensor.
Installation Procedure
Caution:
Refer to
Fastener Caution
in the Preface section.
Apply sealant to the threads of the oil pressure sensor. Refer to
Adhesives, Fluids, Lubricants, and Sealers
for the correct part number.
Using
J 41712
or equivalent, install the oil pressure sensor and tighten to
20 N·m (15 lb ft)
.
Connect the oil pressure sensor electrical connector (1).
Install the intake manifold. Refer to
Intake Manifold Replacement
.