GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2009 🢒 Ascender - 4WD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Parking Brake Indicator Switch Replacement

Removal Procedure

    Object Number: 722607 Size: SH
  1. Remove the front passenger side seat. Refer to Front Seat Replacement - Bucket.

    2. Object Number: 619799 Size: SH
  2. Remove the park brake warning indicator switch electrical connector.
  3. Remove the park brake warning indicator switch retaining bolt.
  4. Remove the park brake warning indicator switch from the vehicle.

Installation Procedure
  1. Install the park brake warning indicator switch.

    2. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 619799 Size: SH
  2. Install the park brake warning indicator switch bolt and tighten to  4 N·m (35 lb in).
  3. Connect the electrical connector.

    4. Object Number: 722607 Size: SH
  4. Install the front passenger side seat. Refer to Front Seat Replacement - Bucket.