GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Isuzu
🢒
2009
🢒
Ascender - 4WD
🢒
Diagnostic Navigation
🢒
Vehicle Diagnostic Information
🢒 Transfer Case Shift Control Switch Replacement
Transfer Case Shift Control Switch Replacement GMC, Buick
Removal Procedure
Remove the floor console. Refer to
Console Replacement
.
Remove the trim plate. Refer to
Instrument Panel Accessory Trim Plate Replacement
.
Push in on the two tabs securing the control switch to the trim plate.
Move the control switch toward the front of the trim plate.
Remove the control switch.
Disconnect the electrical connector from the control switch.
Installation Procedure
Install the electrical connector to the control switch.
Important:
When installing the control switch in the trim plate, a snap should be felt or heard.
Install the control switch in the trim plate.
Install the trim plate. Refer to
Instrument Panel Accessory Trim Plate Replacement
.
Install the floor console. Refer to
Console Replacement
.