GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1257519  Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the stabilizer shaft insulator clamp mounting bolts.
  3. Remove the stabilizer shaft insulator clamp from the stabilizer shaft insulator.
  4. Lower the stabilizer shaft and remove the stabilizer shaft insulator.

Installation Procedure


    Object Number: 1257519  Size: SH
  1. Install the stabilizer shaft insulator to stabilizer shaft with slit facing the front of the vehicle.
  2. Install the stabilizer shaft insulator clamp to the stabilizer shaft insulator.
  3. Caution: Refer to Fastener Caution in the Preface section.

  4. Install the stabilizer shaft insulator clamp mounting bolts and tighten to 54 N·m (40 lb ft).
  5. Lower the vehicle.