For 1990-2009 cars only
Removal Procedure
- Remove the front bucket seat assembly from the vehicle. Refer to Front Seat Replacement - Bucket.
- Remove the seat cushion trim panel. Refer to Seat Cushion Outer Trim Panel Replacement.
- Remove the seat belt anchor nut.
- Release the J-strips (1, 4) across the bottom of the seat back cover.
- Remove the push-pins (3) securing the seat cover (2) to the seat frame.
- Carefully separate the hook and loop retaining strips, and lift the seat cover in order to expose the lower half of the seat back pad.
- Remove the seat back pivot bolt.
- Remove the 2 bolts from the seat back recliner arm.
- Remove the seat back assembly from the seat adjuster.
Note: When separating the hook and loop retaining strips on the seat cover, do not pull the adhesive-backed band from the seat pad.
Installation Procedure
- Install the seat back to the seat adjuster.
- Install the seat back to the seat back recliner arm with the 2 bolts and tighten to 55 N·m (41 lb ft)
- Install the seat back pivot bolt and tighten to 35 N·m (26 lb ft)
- Pull the seat back cover down over the seat back pad.
- Attach the hook and loop retaining strips by running your hand over the seat cover.
- Fasten the J-strips (1, 4) across the bottom of the seat back cover.
- Install the seat cover flaps (2) to the seat frame with push-pins (3).
- Install the seat belt anchor and tighten to 55 N·m (41 lb ft)
- Install the seat cushion trim panel. Refer to Seat Cushion Outer Trim Panel Replacement.
- Install the front bucket seat assembly to the vehicle. Refer to Front Seat Replacement - Bucket.
Caution: Refer to Fastener Caution in the Preface section.
