GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2009 🢒 Ascender - 4WD 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Child Restraint Tether Anchor Replacement - Rear No. 1

Removal Procedure

    Object Number: 744907 Size: SH
  1. Open the liftgate.
  2. Remove the bolt that retains the child restraint tether anchor to the floor panel.
  3. Remove the child restraint tether anchor from the floor panel.

Installation Procedure

    Object Number: 744907 Size: SH
  1. Install the child restraint tether anchor to the floor with the pivot point of the anchor ring indexed toward the front of the vehicle.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the bolt that retains the child restraint tether anchor to the floor panel.

    3. Tighten
    Tighten the child restraint tether anchor bolt to 35 N·m (26 lb ft).

  3. Close the liftgate.