GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the right closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side.
  2. Remove the I/P storage compartment door. Refer to Instrument Panel Compartment Door Replacement.

  3. Object Number: 759898  Size: SH
  4. Disconnect the blower motor electrical connector.
  5. Remove the blower motor mounting screws.
  6. Remove the blower motor cooling tube.
  7. Remove the blower motor (2).

Installation Procedure


    Object Number: 759898  Size: SH
  1. Install the blower motor (2).
  2. Install the blower motor cooling tube.
  3. Caution: Refer to Fastener Caution in the Preface section.

  4. Install the blower motor mounting screws.
  5. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  6. Connect the blower motor electrical connector.
  7. Install the right closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side.