For 1990-2009 cars only
Removal Procedure
- Locate and drill out the spot welds.
- Remove the tie down loop.
Caution: Refer to Approved Equipment for Collision Repair Caution in the Preface section.
Installation Procedure
- Prepare all mating surfaces as necessary.
- Apply GM-approved Weld-Thru coating or equivalent to all mating surfaces. Refer to Anti-Corrosion Treatment and Repair .
- Position the tie down loop.
- Plug weld accordingly.
- Clean and prepare all welded surfaces.
- Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to Anti-Corrosion Treatment and Repair .
- Paint and repair the area. Refer to Basecoat/Clearcoat Paint Systems .
