⢠| J 8614-01 Flange and Pulley Holding Tool |
⢠| J 37212 Front Output Shaft Seal Installer |
Important: In order to easily remove the nut, ensure the staked areas are completely bent out from the shaft.
⢠| The yoke flange nut |
⢠| The O-ring seal |
⢠| The front output yoke flange |
⢠| Discard the nut and O-ring seal. |
Notice: Refer to Transfer Case Seal Removal Notice in the Preface section.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the yoke flange nut to 137 NĀ·m (101 lb ft).