GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2009 🢒 I-290 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Knock Sensor 1 Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

    2. Object Number: 1352025 Size: SH
  2. Disconnect the engine wiring harness electrical connector from the KS (2).
  3. Remove the KS retaining bolt.
  4. Remove the KS (2) from the engine block.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1352025 Size: SH
  1. Install the KS (2) and the retaining bolt to the engine block, positioning the electrical terminals down.

    2. Tighten
    Tighten the KS bolt to 25 N·m (18 lb ft).

  2. Connect the engine wiring harness electrical connector to the KS (2).
  3. Lower the vehicle.