GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2009 🢒 I-290 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Ignition Coil Replacement

Removal Procedure

    Object Number: 1350709 Size: SH
  1. Remove the air cleaner resonator and outlet duct. Refer to Air Cleaner Resonator and Outlet Duct Replacement.

    2. Object Number: 1764736 Size: SH
  2. Disconnect the engine wiring harness electrical connectors from the ignition coils.

    3. Object Number: 1764803 Size: SH
  3. Remove the ignition coil bolts.
  4. Remove the ignition coils from the camshaft cover.

Installation Procedure

    Object Number: 1764803 Size: SH

    Important: Ensure the ignition coil seals are properly seated to the camshaft cover.

  1. Install the ignition coils into the camshaft cover.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the ignition coil bolts.

    3. Tighten
    Tighten the bolts to 10 N·m (89 lb in).


    Object Number: 1764736 Size: SH
  3. Connect the engine wiring harness electrical connectors to the ignition coils.
  4. Install the air cleaner resonator and outlet duct. Refer to Air Cleaner Resonator and Outlet Duct Replacement.