GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2009 🢒 I-290 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Instrument Cluster Replacement

Removal Procedure
  1. Remove the instrument panel cluster (IPC) bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement.

    2. Object Number: 1340551 Size: SH
  2. Remove the screws retaining the IPC to the instrument panel (I/P).

    3. Object Number: 1300433 Size: SH
  3. Partially remove the IPC to reveal the electrical connector  (2).
  4. Notice the position of the connector position assurance (CPA) arm (1).

    5. Object Number: 1300436 Size: SH
  5. Move the CPA arm away from the electrical harness.
  6. Disconnect the electrical connector.
  7. Remove the IPC from the vehicle.

Installation Procedure

    Object Number: 1300436 Size: SH
  1. Position the IPC to the I/P.
  2. Ensure the CPA arm is in the open position. Connect the electrical connector to the IPC.

    3. Object Number: 1300433 Size: SH
  3. To lock the connector (2), move the CPA arm (1) toward the electrical harness.

    4. Object Number: 1340551 Size: SH
  4. Install the IPC to the I/P.

    5. Caution: Refer to Fastener Caution in the Preface section.

  5. Install the screws retaining the IPC to the I/P.

    6. Tighten
    Tighten the screws to 2.5 N·m (22 lb in).

  6. Install the IPC bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement.