GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2009 🢒 I-290 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Blower Motor Resistor Assembly Replacement

Removal Procedure

    Object Number: 888420 Size: SH
  1. Disconnect the blower motor resistor electrical connector (1).
  2. Remove the blower motor resistor mounting screws.
  3. Remove the blower motor resistor (2).

Installation Procedure

    Object Number: 888420 Size: SH
  1. Install the blower motor resistor (2).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the blower motor resistor mounting screws. Tighten the screws to 1.9 N·m (17 lb in).
  3. Connect the blower motor resistor electrical connector (1).