GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2009 🢒 I-290 🢒 Suspension 🢒 Front Suspension 🢒 Torsion Bar Anchor Replacement

Removal Procedure
  1. Remove the torsion bar. Refer to Torsion Bar Replacement.

    2. Object Number: 1253352 Size: SH
  2. Remove the nuts and the bolts from the lower control arm.

    3. Object Number: 1253355 Size: SH
  3. Remove the torsion bar anchor.

Installation Procedure

    Object Number: 1253355 Size: SH
  1. Install the torsion bar anchor.

    2. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1253352 Size: SH
  2. Install the nuts and the bolts to the lower control arm and tighten to 80 N·m (59 lb ft).
  3. Install the torsion bar. Refer to Torsion Bar Replacement.