For 1990-2009 cars only
Removal Procedure
- Remove the 2 screws securing the switch plate assembly to the door trim panel.
- Lift the front of the switch plate up to disengage clip.
- Remove the switch plate out of the door trim panel opening.
- Disconnect the electrical connectors (3, 4) from the switches (2, 5).
- Remove the switch plate assembly (1) from the vehicle.
- If replacing only the switches, remove the switches from the plate.
- If replacing only the switch plate, retain the switches for transfer.
Installation Procedure
- Install the switches (2, 5) to the switch plate (1).
- Connect the electrical connectors (3, 4) to the switches (2, 5).
- Install the switch plate assembly to the door trim panel with the 2 screws and tighten to 2 N·m (18 lb in).
Caution: Refer to Fastener Caution in the Preface section.
