GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2009 🢒 I-290 🢒 Transmission 🢒 Clutch 🢒 Clutch Actuator Cylinder Replacement

Removal Procedure
  1. Remove the transmission. Refer to Transmission Replacement.

    2. Object Number: 1302141 Size: SH
  2. Remove the 2 clutch actuator cylinder bolts (3).
  3. Remove the clutch actuator cylinder (1) from the input shaft bearing retainer (2).

Installation Procedure

    Object Number: 1302141 Size: SH
  1. Position the clutch actuator cylinder (1) to the input shaft bearing retainer (2).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the 2 clutch actuator cylinder bolts (3).

    3. Tighten
    Tighten the clutch actuator cylinder bolts to 8 N·m (71 lb in).

  3. Install the transmission. Refer to Transmission Replacement.