For 1990-2009 cars only
Removal Procedure
- Remove the right wheel and tire assembly. Refer to Tire and Wheel Removal and Installation.
- Remove the engine mount-to-frame bracket through bolt for the mount being replaced.
- Loosen the left side through bolt.
- Raise the engine using the jack stand. The engine will tilt to one side.
- Remove the engine mount bolts.
- Remove the engine mount. You will need to articulate the mount in order to remove the mount.
Installation Procedure
- Install the engine mount. You will need to articulate the mount in order to install the mount.
- Install the engine mount bolts.
- To aid in the installation of the bolts, start a bolt in position (1) first and tighten to 50 N·m (37 lb ft).
- Lower the engine.
- Install the engine mount-to-frame bracket through bolt and tighten to 85 N·m (63 lb ft).
- Remove the jack stand.
- Install the engine shield, if equipped. Refer to Engine Protection Shield Replacement.
- Install the right wheel and tire assembly. Refer to Tire and Wheel Removal and Installation.
Caution: Refer to Fastener Caution in the Preface section.
