GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2009 🢒 I-290 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Hood Replacement

Removal Procedure

    Object Number: 1313590 Size: SH
  1. Remove the front hood seal. Refer to Hood Front Seal Replacement.
  2. Using a grease pencil or other suitable marking device, mark the position of the hood to the hinges.
  3. With the aid of an assistant, remove the 4 bolts that retain the hood to the hood hinges.
  4. With the aid of an assistant, remove the hood from the vehicle.

Installation Procedure

    Object Number: 1313590 Size: SH
  1. With the aid of an assistant, position the hood to the vehicle.
  2. Partially install the 4 bolts that retain the hood to the hinges.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. With the aid of an assistant, position the hood to the hinges at the previously marked locations.

    4. Tighten the bolts to 20 N·m (15 lb ft).

  4. Inspect the hood for proper adjustment. Refer to Hood Adjustment.
  5. Install the front hood seal. Refer to Hood Front Seal Replacement.