GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2009 🢒 I-290 🢒 Body Repair 🢒 Bumpers and Fascias 🢒 Rear Bumper Step Center Pad Replacement

Removal Procedure

    Object Number: 1505967 Size: SH

    Caution: When removing body panels, apply tape to corners of panel and adjacent surfaces to help prevent paint damage.

    Caution: Use a plastic, flat-bladed tool to prevent paint damage when removing an emblem/name plate.

  1. Apply masking tape to protect the bumper surfaces.
  2. Pry the step pad (1) from the bumper bar (2) and the reinforcement (3) using a flat-bladed plastic tool.
  3. Grasp the step pad from the outer edge, pull upward to release it from the bumper bar (2) and the reinforcement (3).

Installation Procedure

    Object Number: 1505967 Size: SH
  1. Position the step pad to the bumper bar (2) and the reinforcement (3).
  2. Press the step pad down.
  3. Remove the masking tape.