GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2009 🢒 I-290 🢒 Steering 🢒 Power Steering 🢒 Power Steering Pump Shaft Seal Replacement

Removal Procedure
  1. Remove the power steering pump from the vehicle, if necessary. Refer to Power Steering Pump Replacement .

    2. Object Number: 1555835 Size: SH

    Important: Protect the drive shaft with the shim stock.

  2. Use a small chisel in order to remove the seal.

    3. Discard the seal.

Installation Procedure
  1. Lubricate the new drive shaft seal using power steering fluid.

    2. Object Number: 1555838 Size: SH
  2. Use a deep socket in order to install the new drive shaft seal.
  3. Install the power steering pump, if removed. Refer to Power Steering Pump Replacement .