Removal Procedure
- Open the sunshade to the full open position.
- Remove the sunroof front trim cover. Refer to
Sunroof Front Trim Cover Replacement.
- Remove the sunroof motor. Refer to
Power Sunroof Motor Replacement.
Note: Note the location of the bolts, size and color when removing, for proper installation.
- Remove the screws from around the lower frame.
- Remove the lower frame from sunroof module.
Installation Procedure
- Install the lower frame to the sunroof module.
Caution: Refer to Fastener Caution in the Preface section.
- Tighten the screws to the lower frame of the sunroof module.
Install the bolts, size and color to the proper location.
Tighten
Tighten the screw to 3 N·m (27 lb in).
- Push the sunroof window to the full open position. This will allow the window, motor and cables to be timed.
- Install the sunroof motor. Refer to
Power Sunroof Motor Replacement.
- Install the sunroof front trim cover. Refer to
Sunroof Front Trim Cover Replacement.
- Verify operations of the sunroof window.