Schematic Reference: Sunroof Schematics

Connector End View Reference: Sunroof Connector End Views

Did you review the Sunroof System Description and Operation and perform the necessary inspections?

Go to Step 2

Go to Sunroof Description and Operation

Attempt to operate the sunroof to the full open then closed positions.

Does the sunroof system operate normal?

Go to Testing for Intermittent Conditions and Poor Connections

Go to Step 3

Turn the ignition ON.

Does the sunroof switch backlight illuminate?

Go to Step 6

Go to Step 4

1. Disconnect the sunroof switch connector.
2. Connect a test lamp from the ignition voltage supply circuit terminal in the harness connector to a good ground.

Does the test lamp illuminate?

Go to Step 5

Go to Step 7

Connect a test lamp from the ignition voltage supply circuit terminal to the ground circuit terminal in the sunroof switch harness connector.

Does the test lamp illuminate?

Go to Step 10

Go to Step 9

1. Disconnect the sunroof motor connector.
2. Connect a test lamp across the control circuit terminals in the switch side harness connector.
3. Operate the sunroof switch in both directions.

Does the test lamp illuminate when the switch is operated in both directions?

Go to Step 11

Go to Step 10

Test the ignition voltage supply circuit to the sunroof switch for an open or short to ground. Refer to Circuit Testing and to Wiring Repairs .

Did you find and correct the condition?

Go to Step 14

Go to Step 8

1. Disconnect the sunroof motor connector.
2. Test the motor control circuits from the switch side harness connector for a short to ground. Refer to Circuit Testing .

Are either of the motor control circuits shorted to ground?

Go to Step 10

Go to Step 11

Repair the sunroof switch ground circuit for an open or high resistance. Refer to Testing for Intermittent Conditions and Poor Connections and to Connector Repairs .

Is the repair complete?

Go to Step 14

--

Inspect for poor connections at the sunroof switch connectors. Refer to Testing for Intermittent Conditions and Poor Connections and to Connector Repairs .

Did you find and correct the condition?

Go to Step 14

Go to Step 12

Inspect for poor connections at the sunroof motor connector. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs .

Did you find and correct the condition?

Go to Step 14

Go to Step 13

Replace the sunroof switch. Refer to Sunroof Switch Replacement .

Is the repair complete?

Go to Step 14

--

Replace the sunroof motor. Refer to Power Sunroof Motor Replacement .

Is the repair complete?

Go to Step 14

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2