GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2008 🢒 I-370 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Rear Side Door Window Switch Replacement

Removal Procedure

    Object Number: 1276822 Size: SH
  1. Remove the 2 screws securing the switch plate assembly to the door trim panel.
  2. Lift the switch plate up and out of the door trim panel.

    3. Object Number: 1276821 Size: SH
  3. Disconnect the electrical connectors from the switch module.
  4. Remove the switch plate assembly from the vehicle.
  5. If replacing only the switch module, remove the module from the switch plate.
  6. If replacing only the switch plate, retain the switch module for transfer.

Installation Procedure

    Object Number: 1276821 Size: SH
  1. Install the switch module to the switch plate.
  2. Connect the electrical connector to the switch module.

    3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1276822 Size: SH
  3. Install the rear switch plate assembly to the door trim panel with the 2 screws.

    4. Tighten
    Tighten the rear door switch plate screws to 2 N·m (18 lb in).